Dodge 2015 Journey Owner'S Manual Download Page 93

Page: 93 / 648

Locating The Tether Anchorages

There are tether strap anchors located behind

each second row rear seatback, near the floor.

LATCH-compatible child restraint systems will be

equipped with a rigid bar or a flexible strap on each side.

Each will have a hook or connector to attach to the lower

anchorage and a way to tighten the connection to the

anchorage. Forward-facing child restraints and some

rear-facing child restraints will also be equipped with a

tether strap. The tether strap will have a hook at the end

to attach to the top tether anchorage and a way to tighten

the strap after it is attached to the anchorage.

Center Seat LATCH

This vehicle has 5 lower LATCH anchorages in the rear

seat. Anchorages A and B are used for the right outboard

position behind the front passenger (1). Anchorages D

and E are used for the left outboard position behind the

driver (3). Anchorages B and C are used for the center

seating position (2). Do not install a LATCH-compatible

child restraint using anchorages C and D. This is not a

LATCH-compatible position in your vehicle.

LATCH Anchorages

(Third Row 60/40 Anchorage Shown)

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands