Dodge 2015 Journey Owner'S Manual Download Page 412

Page: 412 / 648

4. If you wish to stop the cranking of the engine prior to

the engine starting, push the button again.

NOTE:

Normal starting of either a cold or a warm engine

is obtained without pumping or pressing the accelerator

pedal.

To Turn Off The Engine Using ENGINE
START/STOP Button

1. Place the shift lever/gear selector in PARK, then press

and release the ENGINE START/STOP button.

2. The ignition switch will return to the OFF position.
3. If the shift lever/gear selector is not in PARK, the

ENGINE START/STOP button must be held for two

seconds or three short presses in a row with the

vehicle speed above 5 mph (8 km/h) before the engine

will shut off. The ignition switch position will remain

in the ACC position until the shift lever/gear selector

is in PARK and the button is pressed twice to the OFF

position. If the shift lever/gear selector is not in PARK

and the ENGINE START/STOP button is pressed

once, the EVIC (if equipped) will display a “Vehicle

Not In Park” message and the engine will remain

running. Never leave a vehicle out of the PARK

position, or it could roll.

NOTE:

If the ignition switch is left in the ACC or RUN

(engine not running) position and the transmission is in

PARK, the system will automatically time out after 30

minutes of inactivity and the ignition will switch to the

OFF position.

ENGINE START/STOP Button Functions — With
Driver’s Foot OFF The Brake Pedal (In PARK Or
NEUTRAL Position)

The ENGINE START/STOP button operates similar to an

ignition switch. It has four positions, OFF, ACC, RUN

410 STARTING AND OPERATING

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands