Dodge 2015 Journey Owner'S Manual Download Page 19

Page: 19 / 648

•

This device must accept any interference that may be

received, including interference that may cause unde-

sired operation.

NOTE:

Changes or modifications not expressly approved

by the party responsible for compliance could void the

user’s authority to operate the equipment.

VEHICLE SECURITY ALARM — IF EQUIPPED

The Vehicle Security Alarm monitors the vehicle doors

and liftgate for unauthorized entry and the Keyless

Enter-N-Go™ Start/Stop button for unauthorized opera-

tion. While the Vehicle Security Alarm is armed, interior

switches for door locks are disabled. If something trig-

gers the alarm, the Vehicle Security Alarm will provide

the following audible and visible signals: the horn will

pulse, the headlights will turn on, the park lamps and/or

turn signals will flash, and the Vehicle Security Light in

the instrument cluster will flash.

Rearming Of The System

If something triggers the alarm, and no action is taken to

disarm it, the Vehicle Security Alarm will turn the horn

off after 3 minutes, turn all of the visual signals off after

15 additional minutes, and then the Vehicle Security

Alarm will rearm itself.

To Arm The System

Follow these steps to arm the Vehicle Security Alarm:
1. Make sure the vehicle ignition system is

OFF

(refer to

Starting Procedures

Starting And Operating

for

further information).

2. Perform one of the following methods to lock the

vehicle:

•

Push LOCK on the interior power door lock switch

with the driver and/or passenger door open.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands