manualshive.com logo in svg

Dodge 2015 Journey, Owner'S Manual

The Dodge 2015 Journey Owner's Manual is an essential guide for any Journey owner. It provides detailed instructions and information on the vehicle's features, maintenance, and troubleshooting. Download this manual for free from manualshive.com, ensuring you have all the necessary information to make the most of your Dodge Journey.

Share
Download
background image

To Unfold The Seatback

Grasp the assist strap loop on the seatback and pull it

toward you to raise the seatback. Continue to raise the

seatback until it locks in place. Raise the head restraint to

lock it in place.

The seatback can also be locked in the reclined position.

To do so, pull the latch release-loop located at the top of

the seatback upward, allow the seatback to recline, and

release the release-loop.

WARNING!

•

Be certain that the seatback is locked securely into
position. Otherwise, the seat will not provide the
proper stability for passengers. An improperly
latched seat could cause serious injury.

•

Do not allow a passenger to sit in a third row seat
without having the head restraint unfolded and
locked in place. Failure to follow this warning may
result in personal injury to the passenger in the
event of a collision.

(Continued)

Assist Strap

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 Journey

Valeo SC400 Operating Instructions Manual preview
SC400
Brand: Valeo Pages: 17
JANE MICRO Quick Start Manual preview
MICRO
Brand: JANE Pages: 6
Jeep Automobile Service And Warranty Handbook preview
Automobile
Brand: Jeep Pages: 42
Jeep Automobile Warranty Information Booklet preview
Automobile
Brand: Jeep Pages: 44
Cadillac ATS 2015 Convenience/Personalization Manual preview
ATS 2015
Brand: Cadillac Pages: 20
Jeep Automobile Service Contract preview
Automobile
Brand: Jeep Pages: 7
Cadillac 2016 ELR Convenience/Personalization Manual preview
2016 ELR
Brand: Cadillac Pages: 20
Cadillac 2016 CTS Manual preview
2016 CTS
Brand: Cadillac Pages: 354
Cadillac 2005 CTS Personalization Manual preview
2005 CTS
Brand: Cadillac Pages: 20
Cadillac 2014 XTS Convenience/Personalization Manual preview
2014 XTS
Brand: Cadillac Pages: 20
Cadillac ATS 2014 Specifications preview
ATS 2014
Brand: Cadillac Pages: 10
Cadillac 2013 Escalade ESV Owner'S Manual preview
2013 Escalade ESV
Brand: Cadillac Pages: 524
Cadillac 2013 ATS Personalization Manual preview
2013 ATS
Brand: Cadillac Pages: 20
Cadillac ATS 2013 Owenrs Manual preview
ATS 2013
Brand: Cadillac Pages: 438
Cadillac 2013 ATS Owner'S Manual preview
2013 ATS
Brand: Cadillac Pages: 450
Cadillac 2011 Escalade Hybrid Owner'S Manual Addendum preview
2011 Escalade Hybrid
Brand: Cadillac Pages: 94
Cadillac 2011 Escalade Hybrid Owner'S Manual preview
2011 Escalade Hybrid
Brand: Cadillac Pages: 94
Cadillac 2011 CTS COUPE Navigation Manual preview
2011 CTS COUPE
Brand: Cadillac Pages: 78

Brands by name

Popular brands

Load more brands