Dodge 2015 Journey Owner'S Manual Download Page 292

Page: 292 / 648

To Move The Crossbars

1. Loosen the knobs on top of each crossbar approxi-

mately six turns to disengage the clamp tooth from the

side rail.

2. Relocate the crossbars, aligning the crossbar stan-

chions (end pieces) with one of the vertical marks on

the outboard surface of the side rail for proper posi-

tioning. There are four frontward marks for the front

crossbar and four rearward marks for the rear cross-

bar. Make sure the crossbars remain equally spaced or

parallel at any position for proper function.

3. Tighten the knobs on each crossbar to lock it in

position. As you tighten the knob, make sure the

clamp tooth engages completely into the side rail slot.

4. Attempt to move the crossbar to ensure that it is

locked in position.

NOTE:

•

To help control wind noise when installing the cross-

bars, make sure the arrows marked on the underside

of the crossbars face the front of the vehicle.

•

To help reduce the amount of wind noise when the

crossbars are not in use, fasten the front crossbar in the

fourth position from the front and the rear crossbar in

Crossbar Knobs

290 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands