Dodge 2015 Journey Owner'S Manual Download Page 60

Page: 60 / 648

How The Active Head Restraints (AHR) Work

The Occupant Restraint Controller (ORC) determines

whether the severity, or type of rear impact will require

the Active Head Restraints (AHR) to deploy. If a rear

impact requires deployment, both the driver and front

passenger seat AHRs will be deployed.
When AHRs deploy during a rear impact, the front half

of the head restraint extends forward to minimize the gap

between the back of the occupant’s head and the AHR.

This system is designed to help prevent or reduce the

extent of injuries to the driver and front passenger in

certain types of rear impacts.

NOTE:

The Active Head Restraints (AHR) may or may

not deploy in the event of a front or side impact.

However if during a front impact, a secondary rear

impact occurs, the AHR may deploy based on the sever-

ity and type of the impact.

Active Head Restraint (AHR) Components

1 — Head Restraint Front Half
(Soft Foam and Trim)

3 — Head Restraint Back Half
(Decorative Plastic Rear Cover)

2 — Seatback

4 — Head Restraint Guide
Tubes

58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands