Dodge 2015 Journey Owner'S Manual Download Page 359

Page: 359 / 648

Locking The Remote Control

All remote control functionality can be disabled as a

parental control feature.
1. Press the “MORE” button on the touchscreen.
2. Press the “Rear Entertainment” button on the touch-

screen to display the Rear Entertainment Controls.

3. Press the “Lock-out” button on the touchscreen to lock

the remote control. Pressing the “Lock-out” button on

the touchscreen a second time will unlock the remote

control.

NOTE:

Remote control lock-out will only apply to the

current ignition cycle. The VES™ will automatically

remove the lock-out if the ignition is cycled to “OFF”.

Replacing The Remote Control Batteries

The remote control requires two AAA batteries for op-

eration. To replace the batteries:

•

Locate the battery compartment on the back of the

remote, then slide the battery cover downward.

•

Replace the batteries, making sure to orient them

according to the polarity diagram shown.

•

Replace the battery compartment cover.

Headphones Operation

The headphones receive two separate channels of audio

using an infrared transmitter from the video screen.
If no audio is heard after increasing the volume control,

verify that the screen is turned on and in the down

position and that the channel is not muted and the

headphone channel selector switch is on the desired

UNDERSTANDING YOUR INSTRUMENT PANEL 357

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands