Dodge 2015 Journey Owner'S Manual Download Page 226

Page: 226 / 648

is set to ON. In addition, the headlights will turn off

when the wipers are turned off if they were turned on by

this feature.

NOTE:

The Headlights On with Wipers feature can be

turned on or off using the Uconnect® System. Refer to

“Uconnect® Settings/Customer Programmable Fea-

tures” in “Understanding Your Instrument Panel” for

further information.

Headlight Time Delay

This feature provides the safety of headlight illumination

for up to 90 seconds when leaving your vehicle in an

unlit area.
To activate the delay feature, turn OFF the ignition switch

while the headlights are still on. Then, turn off the

headlights within 45 seconds. The delay interval begins

when the headlight switch is turned off.

NOTE:

The lights must be turned off within 45 seconds

of turning the ignition OFF to activate this feature.
If you turn the headlights, parking lights or ignition

switch ON again, the system will cancel the delay.
If you turn the headlights off before the ignition, they will

turn off in the normal manner.

NOTE:

The Headlight Time Delay is programmable us-

ing the Uconnect® System, refer to “Uconnect® Settings

— Customer Programmable Features” in “Understand-

ing Your Instrument Panel” for further information.

Daytime Running Lights (DRL) — If Equipped

The Daytime Running Lights will turn ON the first time

the vehicle is shifted out of PARK, and remain ON unless

the parking brake is applied. Upon returning to the

PARK position, the DRLs will turn OFF. DRLs will turn

OFF when the ignition is switched OFF.

224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands