Dodge 2015 Journey Owner'S Manual Download Page 268

Page: 268 / 648

Sunshade Operation

The sunshade can be opened manually. However, the

sunshade will open automatically as the sunroof opens.

NOTE:

The sunshade cannot be closed if the sunroof is

open.

Wind Buffeting

Wind buffeting can be described as the perception of

pressure on the ears or a helicopter-type sound in the

ears. Your vehicle may exhibit wind buffeting with the

windows down, or the sunroof (if equipped) in certain

open or partially open positions. This is a normal occur-

rence and can be minimized. If the buffeting occurs with

the rear windows open, open the front and rear windows

together to minimize the buffeting. If the buffeting occurs

with the sunroof open, adjust the sunroof opening to

minimize the buffeting or open any window.

Sunroof Maintenance

Use only a nonabrasive cleaner and a soft cloth to clean

the glass panel.

Ignition Off Operation

The power sunroof switch will remain active for up to

approximately ten minutes after the ignition switch is

turned to the LOCK position. Opening either front door

will cancel this feature.

NOTE:

Ignition Off time is programmable through the

Uconnect® System. Refer to “Uconnect® Settings/

Customer Programmable Features” in “Understanding

Your Instrument Panel” for further information.

ELECTRICAL POWER OUTLETS

A 12 Volt (13 Amp) power outlet is located in the center

console below the radio. The power outlet has power

available when the ignition in the ON/RUN or ACC

position.

266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands