Dodge 2015 Journey Owner'S Manual Download Page 174

Page: 174 / 648

Even though international dialing for most number com-

binations is supported, some shortcut dialing number

combinations may not be supported.

Far End Audio Performance

Audio quality is maximized under:

•

Low-To-Medium Blower Setting

•

Low-To-Medium Vehicle Speed

•

Low Road Noise

•

Smooth Road Surface

•

Fully Closed Windows

•

Dry Weather Conditions

•

Operation From The Driver’s Seat

Performance such as audio clarity, echo, and loudness to

a large degree rely on the phone and network, and not

the Uconnect® Phone.
Echo at the far end can sometimes be reduced by

lowering the in-vehicle audio volume.
In a convertible vehicle, system performance may be

compromised with the convertible top down.

Voice Text Reply

Uconnect® Phone can read or send new messages on

your phone.
Your phone must support SMS over Bluetooth® to use

this feature. If the Uconnect® Phone determines your

phone is not compatible with SMS messaging over

Bluetooth® the “Messaging” button will be grayed out

and the feature will not be available for use.

172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands