Dodge 2015 Journey Owner'S Manual Download Page 263

Page: 263 / 648

Without releasing the button

proceed with

“Canadian/Gate Operator Programming” step 2 and

follow all remaining steps.

Using HomeLink®

To operate, push and release the programmed

HomeLink® button. Activation will now occur for the

programmed device (i.e., garage door opener, gate opera-

tor, security system, entry door lock, home/office light-

ing, etc.,). The hand-held transmitter of the device may

also be used at any time.

Security

It is advised to erase all channels before you sell or turn

in your vehicle.
To do this, push and hold the two outside buttons for 20

seconds until the red indicator flashes. Note that all

channels will be erased. Individual channels cannot be

erased.

The HomeLink® Universal Transceiver is disabled when

the Vehicle Security Alarm is active.

Troubleshooting Tips

If you are having trouble programming HomeLink®,

here are some of the most common solutions:

•

Replace the battery in the original hand-held transmit-

ter.

•

Push the LEARN button on the Garage Door Opener

to complete the training for a Rolling Code.

•

Did you unplug the device for programming and

remember to plug it back in?

If you have any problems, or require assistance, please

call toll-free 1-800-355-3515 or, on the Internet at

HomeLink.com for information or assistance.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands