Dodge 2015 Journey Owner'S Manual Download Page 185

Page: 185 / 648

NOTE:

Available Voice Commands are shown in bold

face and underlined in the gray shaded boxes.

General Information

This device complies with Part 15 of the FCC rules and

RSS 210 of Industry Canada. Operation is subject to the

following conditions:

•

Changes or modifications not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

•

This device may not cause harmful interference.

•

This device must accept any interference received,

including interference that may cause undesired op-

eration.

VOICE COMMAND

Uconnect® 8.4/8.4 Nav

The Uconnect® Voice Command system allows

you to control your AM, FM radio, satellite

radio, disc player, SD Card, USB/iPod® and

SiriusXM Travel Link.

NOTE:

Take care to speak into the Voice Command

system as calmly and normally as possible. The ability of

the Voice Command system to recognize user voice

commands may be negatively affected by rapid speaking

or a raised voice level.

WARNING!

Any voice commanded system should be used only
in safe driving conditions following all applicable

(Continued)

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands