Dodge 2015 Journey Owner'S Manual Download Page 2

Page: 2 / 648

VEHICLES SOLD IN CANADA

With respect to any Vehicles Sold in Canada, the name

Chrysler Group LLC shall be deemed to be deleted and the

name Chrysler Canada Inc. used in substitution therefore.

DRIVING AND ALCOHOL

Drunken driving is one of the most frequent causes of

accidents.
Your driving ability can be seriously impaired with blood

alcohol levels far below the legal minimum. If you are

drinking, don’t drive. Ride with a designated non-

drinking driver, call a cab, a friend, or use public trans-

portation.

WARNING!

Driving after drinking can lead to an accident.

Your perceptions are less sharp, your reflexes are

slower, and your judgment is impaired when you

have been drinking. Never drink and then drive.

This manual illustrates and describes the operation of

features and equipment that are either standard or op-

tional on this vehicle. This manual may also include a

description of features and equipment that are no longer

available or were not ordered on this vehicle. Please

disregard any features and equipment described in this

manual that are not on this vehicle.
Chrysler Group LLC reserves the right to make changes

in design and specifications, and/or make additions to or

improvements to its products without imposing any

obligation upon itself to install them on products previ-

ously manufactured.

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands