Dodge 2015 Journey Owner'S Manual Download Page 26

Page: 26 / 648

of the RKE transmitter apart. Make sure not to damage

the seal during removal.

3. Remove the battery by turning the back cover over

(battery facing downward) and tapping it lightly on a

solid surface such as a table or similar, then replace the

battery. When replacing the battery, match the + sign

on the battery to the + sign on the inside of the battery

clip, located on the back cover. Avoid touching the

new battery with your fingers. Skin oils may cause

battery deterioration. If you touch a battery, clean it

with rubbing alcohol.

4. To assemble the RKE transmitter case, snap the two

halves together.

General Information

This device complies with Part 15 of the FCC rules and

RSS 210 of Industry Canada. Operation is subject to the

following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference received,

including interference that may cause undesired op-

eration.

Separating RKE Transmitter Case

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands