Dodge 2015 Journey Owner'S Manual Download Page 444

Page: 444 / 648

flashes when TCS is active. If the “ESC Activation/

Malfunction Indicator Light” begins to flash during ac-

celeration, ease up on the accelerator and apply as little

throttle as possible. Be sure to adapt your speed and

driving to the prevailing road conditions.

NOTE:

•

The “ESC Activation/Malfunction Indicator Light”

and the “ESC OFF Indicator Light” come on momen-

tarily each time the ignition switch is turned ON.

•

Each time the ignition is turned ON, the ESC system

will be ON even if it was turned off previously. Except

for when the vehicle is started while in 4WD Low

Range.

•

The ESC system will make buzzing or clicking sounds

when it is active. This is normal; the sounds will stop

when ESC becomes inactive following the maneuver

that caused the ESC activation.

The “ESC OFF Indicator Light” indicates the

Electronic Stability Control (ESC) is in

ESC

Partial Off

ESC Full Off

Trailer Sway Control (TSC)

TSC uses sensors in the vehicle to recognize an exces-

sively swaying trailer. TSC activates automatically once

the excessively swaying trailer is recognized. When TSC

is functioning, the “ESC Activation/Malfunction Indica-

tor Light” will flash, the engine power will be reduced,

and you will feel the brake being applied to individual

wheels in an attempt to stop the trailer from swaying.

NOTE:

The TSC is disabled when the ESC system is in

the “Partial Off” mode.

442 STARTING AND OPERATING

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands