Dodge 2015 Journey Owner'S Manual Download Page 167

Page: 167 / 648

Call Termination

To end a call in progress, momentarily press the “Phone”

button or the “end” button on the touchscreen.

Only the active call(s) will be terminated and if there is

a call on hold, it will become the new active call.

Redial

Press the “Redial” button on the touchscreen, or push the

“Phone” button

and after the “Listening” prompt

and the following beep, say “Redial.”
The Uconnect® Phone will call the last number that was

dialed from your mobile phone.

Call Continuation

Call continuation is the progression of a phone call on the

Uconnect® Phone after the vehicle ignition key has been

switched to OFF.

NOTE:

The call will remain within the vehicle audio

system until the phone becomes out of range for the

Bluetooth® connection. It is recommended to press the

“transfer” button on the touchscreen when leaving the

vehicle.

Uconnect® Phone Features

Emergency Assistance

If you are in an emergency and the mobile phone is

reachable:

•

Pick up the phone and manually dial the emergency

number for your area.

If the phone is not reachable and the Uconnect® Phone is

operational, you may reach the emergency number as

follows:
1. Push the

button to begin.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands