Dodge 2015 Journey Owner'S Manual Download Page 381

Page: 381 / 648

12. Climate Control OFF Button

Press and release this button to turn the Climate Control

ON/OFF.

13. Driver

Temperature

Control

Down

Button

(Uconnect® 8.4 Only)

Provides the driver with independent temperature con-

trol. Push the button for cooler temperature settings.

NOTE:

In Sync mode, this button will also automatically

adjust the passenger temperature setting at the same

time.

14. Driver Temperature Control Up Button (Uconnect®
8.4 Only)

Provides the driver with independent temperature con-

trol. Push the button for warmer temperature settings.

NOTE:

In Sync mode, this button will also automatically

adjust the passenger temperature setting at the same time.

15. Temperature Control (Uconnect® 4.3 Only)

Press the driver or passenger temperature button on the

touchscreen to regulate the temperature of the air inside

the passenger compartment. Moving the temperature bar

into the red area, indicates warmer temperatures. Mov-

ing the temperature bar into the blue area indicates cooler

temperatures. Driver and passenger have independent

temperature control if Sync mode is not illuminated.

Climate Control Functions

A/C (Air Conditioning)

The Air Conditioning (A/C) button allows the operator

to manually activate or deactivate the air conditioning

system. When the air conditioning system is turned on,

cool dehumidified air will flow through the outlets into

the cabin. For improved fuel economy, press the A/C

button to turn off the air conditioning and manually

UNDERSTANDING YOUR INSTRUMENT PANEL 379

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands