Dodge 2015 Journey Owner'S Manual Download Page 489

Page: 489 / 648

When you do switch fuel types it is recommended that:

•

You do not add less than 5 gallons (19 Liters) when

refueling.

•

You drive the vehicle immediately after refueling for at

least 5 miles (8 km).

Observing these precautions will avoid possible hard

starting and/or significant deterioration in driveability

during warm up.

NOTE:

•

Use seasonally adjusted E-85 fuel (ASTM D5798). With

non-seasonally adjusted E-85 fuel, you may experience

hard starting and rough idle following start up even if

the above recommendations are followed, especially

when the ambient temperature is below 32°F (0°C).

•

Some additives used in regular gasoline are not fully

compatible with E-85 and may form deposits in your

engine. To eliminate driveability issues that may be

caused by these deposits, a supplemental gasoline

additive, such as MOPAR® Injector Cleanup or

Techron may be used.

Selection Of Engine Oil For Flexible Fuel Vehicles
(E-85) And Gasoline Vehicles

FFV vehicles operated on E-85 require specially formu-

lated engine oils. These special requirements are included

in MOPAR® engine oils, and in equivalent oils meeting

Chrysler Specification MS-6395. The manufacturer only

recommends engine oils that are API Certified and meet

the requirements of Material Standard MS-6395. MS-6395

contains additional requirements, developed during ex-

tensive fleet testing, to provide additional protection to

Chrysler Group LLC engines. Use MOPAR® or an

equivalent oil meeting the specification MS-6395.

STARTING AND OPERATING 487

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands