Dodge 2015 Journey Owner'S Manual Download Page 399

Page: 399 / 648

Controlling The Rear Climate Controls From The
Front ATC Panel

The Three-Zone ATC system allows for adjustment of the

rear climate controls from the front ATC panel.

To change the rear system settings:

•

Press

REAR

button to change control to rear control

mode, Rear display (below) will appear. Control func-

tions now operate rear system.

•

To return to Front screen, press

REAR

button again,

or it will revert to the Front screen after six seconds.

Rear Lock

Pressing the Rear Temperature Lock button on the

Uconnect® touchscreen, illuminates a lock symbol in the

rear display. The rear temperature and air source are

controlled from the front Uconnect® system.

Rear second row occupants can only adjust the rear ATC

control when the Rear Temperature Lock button is turned

off.
The rear ATC is located in the headliner, near the center

of the vehicle.

•

Press the Rear Temperature Lock button on the

Uconnect® touchscreen. This turns off the Rear Tem-

perature Lock icon in the rear temperature knob.

•

Rotate the Rear Blower, Rear Temperature and the

Rear Mode Control knobs to suit your comfort needs.

•

ATC is selected by adjusting the rear blower knob

counterclockwise to AUTO.

Once the desired temperature is displayed, the ATC

System will automatically achieve and maintain that

comfort level. When the system is set up for your comfort

UNDERSTANDING YOUR INSTRUMENT PANEL 397

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands