Dodge 2015 Journey Owner'S Manual Download Page 418

Page: 418 / 648

out of PARK (refer to “Brake/Transmission Shift Inter-

lock System” in this section). To drive, move the shift

lever from PARK or NEUTRAL to the DRIVE position.
The electronically-controlled transmission provides a

precise shift schedule. The transmission electronics are

self-calibrating; therefore, the first few shifts on a new

vehicle may be somewhat abrupt. This is a normal

condition, and precision shifts will develop within a few

hundred miles (kilometers).
Only shift from DRIVE to PARK or REVERSE when the

accelerator pedal is released and the vehicle is stopped.

Be sure to keep your foot on the brake pedal when

shifting between these gears.
The transmission shift lever has PARK, REVERSE, NEU-

TRAL, DRIVE, and AutoStick® (-/+) shift positions.

Manual shifts can be made using the AutoStick® shift

control (refer to “AutoStick®” in this section for further

information). Moving the shift lever into the AutoStick®

(+/-) position (below the Drive position) activates

Autostick® mode, providing manual shift control and

displaying the current gear in the instrument cluster. In

AutoStick® mode, tapping the shift lever left (-) or right

(+) will manually select the transmission gear.

Shift Lever

416 STARTING AND OPERATING

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands