Dodge 2015 Journey Owner'S Manual Download Page 503

Page: 503 / 648

WARNING!

(Continued)

•

Total weight must be distributed between the tow
vehicle and the trailer such that the following four
ratings are not exceeded:

1. GVWR
2. GTW
3. GAWR
4. Tongue weight rating for the trailer hitch uti-
lized.

Towing Requirements — Tires

•

Do not attempt to tow a trailer while using a compact

spare tire.

•

Proper tire inflation pressures are essential to the safe

and satisfactory operation of your vehicle. Refer to

“Tires – General Information” in “Starting and Oper-

ating” for proper tire inflation procedures.

•

Check the trailer tires for proper tire inflation pres-

sures before trailer usage.

•

Check for signs of tire wear or visible tire damage

before towing a trailer. Refer to “Tires – General

Information” in “Starting and Operating” for the

proper inspection procedure.

•

When replacing tires, refer to “Tires – General Infor-

mation” in “Starting and Operating” for information

on replacement tires and for the proper tire replace-

ment procedures. Replacing tires with a higher load

carrying capacity will not increase the vehicle’s GVWR

and GAWR limits.

STARTING AND OPERATING 501

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands