Dodge 2015 Journey Owner'S Manual Download Page 273

Page: 273 / 648

CAUTION!

(Continued)

•

Power outlets are designed for accessory plugs
only. Do not hang any type of accessory or acces-
sory bracket from the plug.

POWER INVERTER — IF EQUIPPED

Your vehicle may be equipped with a 115 Volt AC (150

Watt maximum) power outlet located on the back of the

center console. This outlet can power mobile phones,

electronics and other low power devices requiring power

up to 150 Watts. Certain high-end video games, such as

Playstation3 and XBox360 will exceed this power limit, as

will most power tools.

The power inverter is designed with built-in overload

protection. If the power rating of 150 Watts is exceeded,

the power inverter will automatically shut down. Once

the electrical device has been removed from the outlet the

inverter should automatically reset. If the power rating

exceeds approximately 170 Watts, the power inverter

Power Inverter

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands