Dodge 2015 Journey Owner'S Manual Download Page 18

Page: 18 / 648

All of the Key Fobs provided with your new vehicle have

been programmed to the vehicle electronics.

Replacement Keys

NOTE:

Only Key Fobs that are programmed to the

vehicle electronics can be used to start and operate the

vehicle. Once a Key Fob is programmed to a vehicle, it

cannot be programmed to any other vehicle.

CAUTION!

•

Always remove the Key Fobs from the vehicle and
lock all doors when leaving the vehicle unat-
tended.

•

For vehicles equipped with Keyless Enter-N-Go™,
always remember to place the ignition in the OFF
position.

At the time of purchase, the original owner is provided

with a four-digit Personal Identification Number (PIN).

Keep the PIN in a secure location. This number is

required for authorized dealer replacement of Key Fobs.

Duplication of Key Fobs may be performed at an autho-

rized dealer. This procedure consists of programming a

blank Key Fob to the vehicle electronics. A blank Key Fob

is one that has never been programmed.

NOTE:

When having the Sentry Key® Immobilizer Sys-

tem serviced, bring all vehicle keys with you to an

authorized dealer.

Customer Key Programming

Programming Key Fobs or RKE transmitters may be

performed at an authorized dealer.

General Information

The Sentry Key® system complies with FCC rules part 15

and with RSS-210 of Industry Canada. Operation is

subject to the following conditions:

•

This device may not cause harmful interference.

16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands