Dodge 2015 Journey Owner'S Manual Download Page 332

Page: 332 / 648

equipped), power sunroof (if equipped), and power

outlets will remain active for up to 10 minutes after the

ignition is cycled to OFF. Opening either front door will

cancel this feature. To change the Engine Off Power

Delay status, press the “0 seconds,” “45 seconds,” “5

minutes” or “10 minutes” button on the touchscreen.

Then press the back arrow button on the touchscreen.

Compass Settings

•

Variance

Press the Variance button on the touchscreen to change

this display. Compass Variance is the difference between

Magnetic North and Geographic North. To compensate

for the differences, the variance should be set for the zone

where the vehicle is driven, per the zone map. Once

properly set, the compass will automatically compensate

for the differences, and provide the most accurate com-

pass heading.

NOTE:

Keep magnetic materials away from the top of the

instrument panel, such as iPod’s, Mobile Phones, Lap-

tops and Radar Detectors. This is where the compass

module is located, and it can cause interference with the

compass sensor, and it may give false readings.

Compass Variance Map

330 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands