Dell PowerVault MD3200 Series Cli Manual Download Page 234

Page: 234 / 279

234

Script Commands

Parameters

Parameter

Description

profile

Displays all properties of the logical and physical

components that comprise the storage array.

The information returned takes several screens

to display.

NOTE:

The

profile

parameter returns detailed

information about the storage array. The

information covers several screens on a display.

You might need to increase the size of your display

buffer to see all the information. Because this

information is so detailed, you might want to save

the output of this parameter to a file. To save the

output to a file, enter the show storageArray

command similar to the following:

smcli 123.45.67.89 -c "show
storagearray profile;" -o
"c:\\folder\\storagearray
profile.txt"

NOTE:

The previous command syntax is for a host

running Windows. The actual syntax varies

depending on your operating system.

autoSupportConfiguration

The parameter to return information about the

current state of the operation to automatically

collect support data. The information this

parameter returns is:

• Whether the operation is enabled or disabled
• The location of the folder where the support

data file is located

batteryAge

Displays the status, the age of the battery in days,

and the number of days until the battery needs

to be replaced.

connections

Displays a list of the drive channel port locations

and the drive channel connections.

defaultHostType

Displays the default host type and host type

index.

book.book Page 234 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands