Dell PowerVault MD3200 Series Cli Manual Download Page 14

Page: 14 / 279

About the Command Line Interface

You can use the command line interface to perform the following functions:

• Directly access the script engine and run commands in interactive mode or

using a script file.

• Create script command batch files to be run on multiple storage arrays when

you need to install the same configuration on different storage arrays.

• Run script commands on a storage array directly connected to a host, a

storage array connected to a host by an Ethernet, or a combination of both.

• Display configuration information about the storage arrays.
• Add storage arrays to and remove storage arrays from the

management domain.

• Perform automatic discovery of all storage arrays attached to the local subnet.

• Add or delete Simple Network Management Protocol (SNMP) trap

destinations and e-mail alert notifications.

• Specify the mail server and sender e-mail address or Simple Mail Transport

Protocol (SMTP) server for alert notifications.

• Direct the output to a standard command line display or to a named file.

How to Use the Command Line Interface

Using the CLI commands, you can access the script engine, specify which storage

array receives the script commands, and set operation environment parameters.
A CLI command consists of the following elements:

• The term

SMcli

• Storage array identifier
• Parameters
• Script commands

book.book Page 14 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands