Dell PowerVault MD3200 Series Cli Manual Download Page 160

Page: 160 / 279

160

Script Commands

Download Physical Disk Firmware

This command downloads a firmware image to a physical disk.

CAUTION:

Downloading physical disk firmware incorrectly can result in damage

to the physical disks or loss of data.

Before attempting to download physical disk firmware, you must take the

following precautions:

Stop all I/O activity to the storage array before downloading the

firmware image.

Ensure the firmware image file is compatible with the physical disk

enclosure. If you download a file that is not compatible with the selected

physical disk enclosure, the enclosure might become unusable.

Do not make any configuration changes to the storage array while

downloading the physical disk firmware. Attempting to make a

configuration change can cause the firmware download to fail and make

the selected physical disks unusable.

You can use this command to test the firmware on one physical disk before

installing the firmware on all of the physical disks in a storage array. (Use the

download storageArray physicalDiskFirmware

command to download

firmware on all of the physical disks in the storage array.) This command

blocks all I/O activity until the download finishes or fails. The download

returns one of the following statuses:

• Successful
• Unsuccessful With Reason
• Never Attempted With Reason.

Syntax

download physicalDisk [

enclosureID,slotID

]

firmware file="

filename

book.book Page 160 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands