Dell PowerVault MD3200 Series Cli Manual Download Page 130

Page: 130 / 279

130

Script Commands

Syntax

create hostPort identifier="

wwid

userLabel="

portLabel

host="

hostName

interfaceType=SAS

Parameters

NOTE:

You can use any combination of alphanumeric characters, hyphens, and

underscores for the names. Command names can have a maximum of 30

characters. If you exceed the maximum character limit, replace square brackets

([ ]) with angle brackets (< >) to overcome this limitation.

Parameter

Description

identifier

WWID of the HBA host port. You must

put quotation marks (" ") around the

WWID.

userLabel

Name to give the new HBA host port. You

must put quotation marks (" ") around

the port label.

host

Name of the host for which you are

defining an HBA host port. You must put

quotation marks (" ") around the host

name.

NOTE:

An HBA host port is a physical

connection on a host adapter that resides

within a host system. An HBA host port

provides host access to the virtual disks in

a storage array. If the host bus adapter has

only one physical connection (one host

port), the terms host port and host bus

adapter are synonymous.

interfaceType

The identifier for the type of interface for

the host port.
You must enter

SAS

. If you do not enter

SAS

, the command attempts to use an

invalid type of interface. A SAS selection

requires an 8-byte WWID.

book.book Page 130 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands