Dell PowerVault MD3200 Series Cli Manual Download Page 155

Page: 155 / 279

Script Commands

155

Parameters

Diagnose RAID Controller Module

This command runs diagnostic tests on the RAID controller module.
The

testID

parameter takes the following options, which you can use to verify

that a RAID controller module is functioning correctly:

•

— Reads the test

•

— Performs a data loop-back test

•

— Writes the test

The diagnostic tests consist of loop-back tests in which data is written to

physical disks and read from the physical disks.

Parameter

Description

allVirtualDisks

Deletes all virtual disks in a storage array.

NOTE:

Using the

allVirtualDisks

parameter

deletes virtual disks until all are removed or

until an error is encountered. If an error is

encountered, this command does not attempt

to delete the remaining virtual disks.

virtualDisk

virtualDisks

Name of the virtual disk to delete. You

can enter more than one virtual disk

name. You must put brackets ([ ]) around

the virtual disk name. If the virtual disk

name has special characters, you must

also put quotation marks (" ") around the

virtual disk name.

removeDiskGroup

Deleting the last virtual disk in a disk

group does not delete the disk group. You

can have a standalone disk group (minus

any virtual disks). To remove the

standalone disk group, set this parameter

TRUE

. To keep standalone disk groups

intact, set this parameter to

FALSE

book.book Page 155 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands