Dell PowerVault MD3200 Series Cli Manual Download Page 195

Page: 195 / 279

Script Commands

195

Parameters

NOTE:

When you use this command, you can specify one or more of the optional

parameters. You do not, however, need to use all of the parameters.

NOTE:

You can use any combination of alphanumeric characters, hyphens, and

underscores for the names. Command names can have a maximum of 30

characters. If you exceed the maximum character limit, replace square brackets

([ ]) with angle brackets (< >) to overcome this limitation.

Set iSCSI Initiator

This command sets the attributes for an iSCSI initiator.

Syntax

set iscsiInitiator [“iscsiID“]|
userLabel=”newName” |
host=”newHostName” |
chapSecret=”newSecurityKey”

Parameters

Parameter

Description

hostPort

The name of the HBA host port for which you want to change the

host type, or for which you want to create a new name. Enclose the

HBA host port name in square brackets ([ ]). If the HBA host port

label has special characters, enclose the HBA host port label in

double quotation marks (" ").

host

The name of the host to which the HBA host port is connected.

Enclose the host name in double quotation marks (" ").

userLabel

The new name that you want to give to the HBA host port. Enclose

the new name of the HBA host port in double quotation marks (" ").

Parameter

Description

iscsiID

The name of the iSCSI initiator for which you want to set attributes.

userLabel

The new name that you want to use for the iSCSI initiator.

host

The name of the new host to which the HBA host port is connected.

Enclose the host name in double quotation marks (" ").

book.book Page 195 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands