Dell PowerVault MD3200 Series Cli Manual Download Page 184

Page: 184 / 279

184

Script Commands

Save Storage Array Events

This command saves events from the Major Event Log (MEL) to a file. You

can save either all the events or only the critical events.

Syntax

save storageArray (allEvents | criticalEvents)
file="

filename

" [count=

numberOfEvents

]

Parameters

Save Storage Array iSCSI Statistics

This command saves the iSCSI performance of the storage array to a file. The

following statistics are saved to the file:

• Statistics related to the physical Ethernet port
• Statistics related to the TCP protocol
• Statistics related to the IP protocol

Syntax

save storageArray iscsiStatistics [raw | baseline]
file="

filename

Parameter

Description

file

Name of the file to which to save the events. You must

put quotation marks (" ") around the file name.

count

Specifies the number of events or critical events to save

to a file. If you do not enter a value for the count, all

events or critical events are saved to the file. If you enter

a value for the count, only that number of events or

critical events (starting with the last event entered) are

saved to the file. Use integer values.

book.book Page 184 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands