Dell PowerVault MD3200 Series Cli Manual Download Page 192

Page: 192 / 279

192

Script Commands

NOTE:

When you use this command, you can specify one or more of the optional

parameters. You do not, however, need to use all of the parameters.

NOTE:

You can use any combination of alphanumeric characters, hyphens, and

underscores for the names. Command names can have a maximum of 30

characters. If you exceed the maximum character limit, replace square brackets

([ ]) with angle brackets (< >) to overcome this limitation.

Set Host Channel

This command defines the loop ID for the host channel.

userLabel

The new host name. Enclose the host name in double quotation

marks (" ").

hostType

The index label or number of the host type for the HBA host port.

Use the show storageArray hostTypeTable command to generate a list

of available host type identifiers. If the host type has special

characters, enclose it in double quotation marks (" ").

Host Group Parameter Host Has Individual Virtual

Disk-to-LUN Mappings

Host Does Not Have Individual
Virtual Disk-to-LUN Mappings

hostGroupName

The host is removed from

the present host group and is

placed under the new host

group defined by

hostGroupName

The host is removed from the

present host group and is

placed under the new host

group defined by

hostGroupName

none

The host is removed from

the host group as an

independent partition and is

placed under the root node.

The host is removed from the

present host group and is

placed under the default

group.

defaultGroup

The command fails.

The host is removed from the

present host group and is

placed under the default

group.

Parameter

Description

book.book Page 192 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands