Dell PowerVault MD3200 Series Cli Manual Download Page 15

Page: 15 / 279

About the Command Line Interface

The following syntax is the general form of a CLI command:

SMcli

storageArray parameters script-commands;

where,

SMcli

invokes the command line interface

storageArray

is the host name or IP address of the storage array

parameters

are the CLI parameters that define the environment and

purpose of the command

script-commands

are the commands or name of the script file containing

the script commands
The script commands are the storage array configuration commands. "About

the Script Commands" on page 29 presents an overview of the script

commands. "Script Commands" on page 105 provides definitions, syntax, and

parameters for the script commands.

Usage Notes

If you enter

SMcli

and a storage array name but do not specify CLI

parameters, script commands, or a script file, the command line interface

runs in interactive mode. Interactive mode enables you to run individual

commands without prefixing the commands with

SMcli

. You can enter a

single command, view the results, and enter the next command without

typing the complete

SMcli

string. Interactive mode is useful for determining

configuration errors and quickly testing configuration changes.
If you enter

SMcli

without any parameters or with an incorrect parameter, the

script engine returns usage information.

NOTE:

The SMcli command is installed under the client directory of the selected

path during a management station install of the MD Storage Manager software.

NOTE:

The SMcli command should be a component of the system environment

command path.

book.book Page 15 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands