Dell PowerVault MD3200 Series, Cli Manual

Page: 148 / 279

148
Script Commands
Additional Information
To use this command successfully, you need to have enough SES drives to
create atleast one volume group. The controller firmware creates a lock that
restricts access to the SES drives. SES drives have a state called Security
Capable. When you create a security key, the state is set to Security Enabled,
which restricts access to all SES drives that exist within the storage array.
You can have a storage array configuration with more than one set of
encrypted volume groups. Each volume group can have a unique security key.
The character string generated by the keyIdentifier parameter is a string that
you can read and that enables you to identify the security key that you need.
You can create a keyIdentifer by using one of these methods:
• You can enter up to 189 alphanumeric characters for a key identifier. The
key identifier cannot have these characters:
–
White spaces
– Punctuation
– Symbols
• You can leave out this parameter.
Additional characters are automatically generated and appended to the end of
the string that you enter for the key identifier. If you do not enter any string
for the keyIdentifier parameter, the key identifier consists of only the
characters that are automatically generated.
Your pass phrase must meet these criteria:
• The pass phrase must be between eight and 32 characters long.
• The pass phrase must contain at least one uppercase letter.
• The pass phrase must contain at least one lowercase letter.
• The pass phrase must contain at least one number.
• The pass phrase must contain at least one non-alphanumeric character, for
example, < > @ +.
If your pass phrase does not meet these criteria, you receive an error message
and you must retry the command.
book.book Page 148 Friday, March 4, 2011 10:45 AM