Dell PowerVault MD3200 Series Cli Manual Download Page 249

Page: 249 / 279

Script Commands

249

Start Disk Group Import

This command moves a disk group into a Complete state to make a newly

introduced disk group available to its new storage array. The disk group must

be in an Exported state or a Forced state before you run this command. Upon

successfully running the command, the disk group is operational.

NOTE:

Within the disk group, you cannot move virtual disks that are associated

with the premium features from one storage array to another storage array.

Syntax

start diskGroup [diskGroupName] import

Parameter

NOTE:

Higher-level virtual disks that are specifically related to premium features

(Snapshot, Remote Virtual Disk Mirroring, Virtual Disk Copy, mapping, and

persistent reservations) are removed as part of the import operation. You must run

the show diskGroup importDependencies command before you run the start

diskGroup import command.

Start Enclosure Blink

This command identifies an enclosure by turning on the indicator LED. (Use

the

stop enclosure blink

command to turn off the indicator LED for the

enclosure.)

Syntax

start enclosure [

enclosureID

] blink

Parameter

Description

diskGroup

Number of the disk group to defragment. You

must put brackets ([ ]) around the disk group

number.

book.book Page 249 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands