Dell PowerVault MD3200 Series Cli Manual Download Page 18

Page: 18 / 279

About the Command Line Interface

Command Line Parameters

Table 1-2. Command Line Parameters

Parameter

Definition

host-name-or-IP-address Specify either the host name or the Internet Protocol (IP)

address of an in-band managed storage array (IPv4 or IPv6)

or an out-of-band managed storage array (IPv4 or IPv6).

• If you manage a storage array by using a host connected

directly to the storage array (in-band storage

management), you must use the

-n

parameter if more

than one storage array is connected to the host.

• If you manage a storage array through an Ethernet

connection (out-of-band storage management), you must

specify the

host-name-or-IP-address

of the redundant

array of independent disks (RAID) controller modules.

• If you have previously configured a storage array in the

graphical user interface (GUI) of the MD Storage

Manager, you can specify the storage array by its

user-supplied name by using the

-n

parameter.

-A

Use to add a storage array to the configuration files. If you do

not follow the

-A

parameter with a

host-name-or-IP-address

automatic discovery scans the local subnet for storage arrays.

-a

Use to add an SNMP trap destination or an e-mail address

alert destination.

• When adding an SNMP trap destination, the SNMP

community is automatically defined as the community

name for the trap and the

host

is the IP address or

Domain Name Server (DNS) host name of the system to

which the trap should be sent.

• When adding an e-mail address for an alert destination,

the

email-address

is the e-mail address to which to send

the alert message.

book.book Page 18 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands