Dell PowerVault MD3200 Series, Cli Manual

Page: 224 / 279

224
Script Commands
Show Current iSCSI Sessions
This command displays information about an iSCSI session for either an
iSCSI initiator or iSCSI target.
Syntax
When running from the command line, use:
show iscsiInitiator [\“ initiatorName \”]
iscsiSessions
show iscsiTarget [\“ targetName \”] iscsiSessions
When running from a script file, use:
show iscsiInitiator [“ initiatorName ”]
iscsiSessions
show iscsiTarget [“ targetName ”] iscsiSessions
Parameters
NOTE:
This command can be entered without defining any arguments, i.e.
show iscsiSessions
When the command is entered without arguments, the information displayed is for
all active iSCSI sessions. To limit the information displayed, enter a specific iSCSI
initiator or a specific iSCSI target. The command then displays only information
about that particular iSCSI initiator or iSCSI target session.
Parameter Description
initiatorName The name of the iSCSI initiator for which session information is
desired. Enclose the iSCSI initiator name in double quotation
marks (“ ”). The name and quotation marks must also be
enclosed in either square brackets ([ ]) or angle brackets (< >). If
the name is longer than 30 characters, the angle brackets must be
used.
targetName The name of the iSCSI target for which session information is
desired. Enclose the iSCSI target name in double quotation
marks (“ ”). The name and quotation marks must also be
enclosed in either square brackets ([ ]) or angle brackets (< >). If
the name is longer than 30 characters, the angle brackets must be
used.
book.book Page 224 Friday, March 4, 2011 10:45 AM