Dell PowerVault MD3200 Series Cli Manual Download Page 229

Page: 229 / 279

Script Commands

229

Parameters

Parameter

Description

allPhysicalDisks

Returns information about all physical disks in

the storage array.

NOTE:

To determine information about the type

and location of all physical disks in the storage

array, use the

allPhysicalDisks

parameter.

driveMediaType

retrieve information. Valid physical disk media

are these:

• HDD—Use this option when you have hard

physical disks

• in the expansion enclosure.
• SSD—Use this option when you have solid

state physical disks in the expansion enclosure.

• unknown—Use if you are not sure what types of

physical disk media are in the expansion

enclosure.

• allMedia – Use this option when you want to

use all types of physical disk media that are in

the expansion enclosure.

physicalDiskType

The type of physical disk for which you want to

retrieveinformation. The valid physical disk type

is SAS.

physicalDisk or
physicalDisks

Identifies the enclosure and slot where the

physical disk resides. You can enter enclosure IDs

and slot IDs for one or several physical disks.

Enclosure ID values are 0 to 99. Slot ID values

are 0 to 31. You must put parentheses around the

enclosure ID values and the slot ID values.

summary

Returns the status, capacity, data rate, product

ID, and firmware version for the specified

physical disks.

NOTE:

To determine the type of physical disk in a

specific location, use the

physicalDisk

parameter,

and enter the enclosure and slot IDs for the

physical disk.

book.book Page 229 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands