Dell PowerVault MD3200 Series Cli Manual Download Page 121

Page: 121 / 279

Script Commands

121

NOTE:

When you run this command, the storage array becomes unresponsive, and

all script processing is cancelled. You must remove and re-add the storage array to

resume communication with the host. To remove an unresponsive storage array,

access the Enterprise Management Window, and click Edit



Remove. To re-add

the storage array, access the Enterprise Management Window, click Edit



Add

Storage Array, and enter the appropriate IP addresses.

Clear Storage Array Event Log

This command clears the Major Event Log (MEL) for the storage array by

deleting the data in the MEL buffer.

CAUTION:

As soon as you run this command, the existing MEL in the storage

array is deleted.

Syntax

clear storageArray eventLog

Parameters

None.

Clear Storage Array Firmware Pending Area

This command deletes a previously downloaded firmware image or

nonvolatile static random access memory (NVSRAM) values from the

pending area buffer.

CAUTION:

As soon as you run this command, the contents of the existing pending

area in the storage array are deleted.

Syntax

clear storageArray firmwarePendingArea

Parameters

None.

volumeGroups

The setting to remove the virtual disk

configuration and the disk group configuration.

The rest of the configuration stays intact.

Parameter

Description

book.book Page 121 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands