Dell PowerVault MD3200 Series, Cli Manual

Page: 124 / 279

124
Script Commands
Parameters
Parameter Description
physicalDisks
The physical disks that you want to assign to the
disk group that you want to create. Specify the
enclosure ID value and the slot ID value for each
physical disk that you assign to the disk group.
Enclosure ID values are 0 to 99 . Slot ID values are 0
to 31 . Enclose the enclosure ID values and the slot
ID values in parentheses.
raidLevel
The RAID level of the disk group that contains the
virtual disk. Valid values are 0 , 1 , 5 , or 6 .
userLabel
The alphanumeric identifier (including - and _)
that you want to give the new disk group. Enclose
the disk group identifier in double quotation marks
(“ ”).
driveMediaType
The type of physical disk media that you want to use
for the disk group. Valid physical disk media consists
of:
• HDD — Use this option when you have hard
physical disks in the expansion enclosure.
• SSD — Use this option when you have solid state
physical disks in the expansion enclosure.
• unknown —Use if you are not sure what types of
physical disk media are in the expansion enclosure.
• allMedia — Use this option when you want to use
all types of physical disk media that are in the
expansion enclosure.
physicalDiskType
The type of physical disk that you want to use in the
virtual disk. You cannot mix physical disk types. The
valid physical disk type is SAS . You must specify a
physical disk type.
book.book Page 124 Friday, March 4, 2011 10:45 AM