Dell PowerVault MD3200 Series Cli Manual Download Page 120

Page: 120 / 279

120

Script Commands

Clear Physical Disk Port Statistics

This command resets the statistics for all physical disk ports.

Syntax

clear allPhysicalDiskChannels stats

Parameters

None.

Clear Storage Array Configuration

Use this command to:

• Clear the entire storage array configuration, and return it back to the

initial installation state.

• Clear the configuration except for security information and identification

information.

• Clear disk group configuration information and virtual disk configuration

information only.

CAUTION:

As soon as you run this command, the existing storage array is deleted.

Syntax

clear storageArray configuration (all |
volumeGroups)

Parameters

If you do not enter a parameter, this command removes all configuration

information for the storage array, except for the information related to

security and identification.

Parameter

Description

all

The setting to remove the entire configuration of

the storage array, including security and identity

information. Removing all configuration

information returns the storage array to its initial

state.

book.book Page 120 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands