Dell PowerVault MD3200 Series Cli Manual Download Page 179

Page: 179 / 279

Script Commands

179

Reset Storage Array SAS PHY Baseline

This command resets the SAS physical layer (PHY) baseline for all SAS

devices in a storage array.

Syntax

reset storageArray SASPHYBaseline

Parameters

None.

Reset Storage Array Virtual Disk Distribution

This command reassigns (moves) all virtual disks to their preferred RAID

controller module.

Syntax

reset storageArray virtualDiskDistribution

Parameters

None.

CAUTION:

Ensure that the multipath driver is running before you use this

command, or the virtual disk is not accessible.

NOTE:

Under certain host operating system environments, you might be required to

reconfigure the multipath host physical disk. You might also need to make operating

system modifications to recognize the new I/O path to the virtual disks.

Revive Disk Group

This command forces the specified disk group and associated failed physical

disks to the Optimal state. All physical disks assigned to the disk group must

be installed before you attempt to run this command.

CAUTION:

Correct use of this command depends on the data configuration on all

of the physical disks in the disk group. Never attempt to revive a physical disk
unless supervised by a Customer or Technical Support representative.

Syntax

revive diskGroup [

diskGroupNumber

]

book.book Page 179 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands