Dell PowerVault MD3200 Series Cli Manual Download Page 13

Page: 13 / 279

About the Command Line Interface

About the Command Line Interface

This guide is intended for system administrators, developers, and engineers

who need to use the command line interface (CLI) tool and its associated

commands and script files. Selected CLI commands perform functions that

can also be accessed from the Modular Disk (MD) Storage Manager, which is

the graphical user interface (GUI) to the storage array. See the

Owner’s

Manual

, which describes the Storage Manager software that is used to create and

manage multiple storage arrays. For additional information, see the hardware

and software manuals that shipped with your system.

NOTE:

Always check for updates on support.dell.com and read the updates first

because they often supersede information in other documents.

NOTE:

CLI commands do not have interactive warnings for destructive commands.

CLI is a software tool that enables storage array installers, developers, and

engineers to configure and monitor storage arrays. Using the command line

interface, you can issue commands from an operating system prompt, such as

the Microsoft Windows command prompt (

C:\

)

or a Linux operating

system terminal.
Each command performs a specific action for managing a storage array or

returning information about the status of a storage array. You can enter

individual commands, or run script files when you need to perform operations

more than once (such as installing the same configuration on several storage

arrays). A script file can be loaded and run from the command line interface.

You can also run commands in an interactive mode. Interactive mode enables

you to connect to a specific storage array and rapidly enter a command,

determine the effect on the storage array, and then enter a new command.
The command line interface gives you direct access to a script engine utility in

the Dell PowerVault Modular Disk Storage Manager software (MD Storage

Manager). The script engine reads the commands, or runs a script file, from the

command line and performs the operations instructed by the commands.

book.book Page 13 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands