Dell PowerVault MD3200 Series Cli Manual Download Page 100

Page: 100 / 279

100

Maintaining a Storage Array

For best results, run all three tests at initial installation. Also, run the tests any

time you make changes to the storage array or to components connected to

the storage array (such as hubs, switches, and host adapters).
A custom data pattern file called

diagnosticsDataPattern.dpf

is included on

the

Utility

directory of the installation CD. You can modify this file, but the

file must have the following properties to work correctly for the tests:

• The file values must be entered in hexadecimal format (00 to FF) with

only one space between the values.

• The file must be no larger than 64 bytes in size. Smaller files can be used,

but larger files can cause an error.

The test results contain a generic, overall status message and a set of specific

test results. Each test result contains the following information:

• Test (read/write/data loopback)
• Port (read/write)
• Level (internal/external)
• Status (pass/fail)

Events are written to the MEL when diagnostics are started and when testing

is completed. These events help you to evaluate whether diagnostics testing

was successful or failed and the reason for the failure.

Recovery Operations

Recovery operations involve replacing failed RAID controller modules and

physical disks, restoring data, and restoring the storage array to operation.

Setting RAID Controller Module Operational Mode

A RAID controller module has three operational modes:

• Online
• Offline
• Service

CAUTION:

Placing a RAID controller module offline can cause loss of data.

book.book Page 100 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands