Dell PowerVault MD3200 Series Cli Manual Download Page 89

Page: 89 / 279

Using the Virtual Disk Copy Feature

Storage Partitioning

Storage partitioning enables hosts to share access to virtual disks in a storage

array. You create a storage partition when you define the following storage

array assignments:

• A host
• A host group
• Virtual disk-to-logical unit number (LUN) mapping

The virtual disk-to-LUN mapping enables you to define which host group or

host has access to a particular virtual disk in the storage array.
After you create a virtual disk copy, the target virtual disk automatically

becomes read-only to hosts to ensure that the data is preserved. Hosts that

have been mapped to a target virtual disk do not have write access to the

virtual disk, and any attempt to write to the read-only target virtual disk

results in a host I/O error.
If you want hosts to have write access to the data on the target virtual disk,

use the

set virtualDiskCopy

command to disable the read-only attribute for

the target virtual disk.

Snapshot Virtual Disks

A snapshot virtual disk is a point-in-time image of a virtual disk. It is typically

created so that an application, such as a backup, can access the snapshot

virtual disk and read the data while the source virtual disk remains online and

accessible to hosts.

CAUTION:

Before using the source virtual disk of a snapshot virtual disk as your

target, you must disable all snapshot virtual disks associated with the source
virtual disk. By disabling the snapshot virtual disks, you avoid altering the
snapshot data if the source virtual disk is changed.

Creating a snapshot virtual disk automatically creates a snapshot repository

virtual disk. The snapshot repository virtual disk stores information about the

data that has changed since the snapshot virtual disk was created. Snapshot

repository virtual disks cannot be selected as a source virtual disk or target

virtual disk in a virtual disk copy.
The virtual disk for which the point-in-time image is created is the source

virtual disk and must be a standard virtual disk in the storage array.

book.book Page 89 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands