Dell PowerVault MD3200 Series Cli Manual Download Page 238

Page: 238 / 279

238

Script Commands

Show Storage Array LUN Mappings

This command returns information from the storage array profile about the

storage array LUN mappings. If you run this command with no parameters,

this command returns all LUN mappings.

Syntax

show storageArray lunMappings [host ["

hostName

"] |

hostgroup ["

hostGroupName

"]]

Parameters

Show Storage Array Negotiation Defaults

This statement returns information about connection-level settings that are

subject to initiator-target negotiation.

Syntax

show storageArray iscsiNegotiationDefaults

Parameters

None.

NOTE:

Information returned includes RAID controller module default settings

(settings that are the starting point for negotiation), and the current active settings.

Parameter

Description

host

Name of a specific host for which to see the LUN mappings.

You must put quotation marks (" ") and brackets ([ ]) around

the host name. The host name and quotation marks must be

inside the brackets.

hostGroup

Name of a specific host group for which to see the LUN

mappings. You must put quotation marks (" ") and brackets

([ ]) around the host group name.The host group name and

quotation marks must be inside the brackets.

book.book Page 238 Friday, March 4, 2011 10:45 AM

Summary of Contents for PowerVault MD3200 Series
























































































































































































































































































Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands

Dell PowerVault MD3200 Series, Cli Manual

Search results

Summary of Contents for PowerVault MD3200 Series

Reviews:

Related manuals for PowerVault MD3200 Series

Brands by name

Popular brands