DAELIM DAYSTAR -, Service Manual

Page: 177 / 214

16-4
Charging System/Battery
Charging
Remove the battery caps.
Fill the cells with distilled water to the upper
level, if necessary.
Connect the charger positive
cable to the
battery positive terminal.
Connect the charger negative cable to the
battery negative terminal.
Charge the battery until specific gravity is
1.270~1.290{20
(68 )}.
•
Before charging a battery, remove the cap from
the each cell.
•
Keep flames and sparks away from a charging
battery.
•
Turn power ON/OFF at the charger, not at the
battery terminals to prevent spark.
•
Discontinue charging if the electrolyte
temperature exceeds 45
(113 )
•
Quick charging should only be done in an
emergency: slow charging is preferred.
Assembly
Assembly is essentially the reverse order of
disassembly.
•
The bleed tube may contains the battery fluid
and the battery fluid causes damages to the
battery.
•
Connect the bleed tube into the battery
correctly.
•
Be careful not to bend the battery tube. Bent
battery tube causes battery explosion.
•
Connect the charger positive cable to the
battery positive terminal first, then connect the
charger negative
cable to the battery
negative terminal.
!
CAUTION
△
!
CAUTION
△
Battery Charger
!
WARNING
△