DAELIM DAYSTAR - Service Manual Download Page 113

Page: 113 / 214

10-8

Crank Case / Transmission / Crankshaft / Kick Starter

R. Crank Case

●

Remove the main shaft bearing set plate.

●

Separate the main shaft bearing, counter shaft
bearing and crank shaft bearing form crank
case.

●

Coat the new bearing with clean engine oil and
install it into crank case.

●

Insert closely the cooling jet into crank case

- Insert angle: 10

。

Tool :
Main Shaft bearing:

- Driver / Attachment, 42

47mm /

Pilot, 20mm

Counter shaft bearing:

- Driver / Attachment, 32

35mm /

Pilot, 15mm

Crank shaft bearing:

- Driver / Attachment, 62

68mm /

Pilot, 28mm

●

Coat the socket bolt screw part with oil and
install the main shaft bearing set plate.

Torque: 1.2kg-m

Crankshaft Installation

●

Coat a new light crankshaft bearing with clean
engine oil and install new bearings into the
light crank case.

Tool:

- Driver
- Attachment, 72

78mm

- Pilot, 35mm

●

Install the crankshaft into the left crankcase
with the following tools

Tools:

- Thread adapter
- Assembly shaft
- Crankshaft assembly collar

Cooling Jet

Summary of Contents for DAYSTAR -























































































































































































































Search results

Summary of Contents for DAYSTAR -

Reviews:

Related manuals for DAYSTAR -

Brands by name

Popular brands

DAELIM DAYSTAR -, Service Manual

Search results

Summary of Contents for DAYSTAR -

Reviews:

Related manuals for DAYSTAR -

Brands by name

Popular brands