DAELIM DAYSTAR -, Service Manual

Page: 48 / 214

4-10
Fuel System
●
Blow each jet and body pathway with compressed
air, and clean the clogged place.
●
Install the needle jet, needle jet holder, main jet
and slow jet. Install the throttle stop screw and
pilot screw.
•
After tighten the pilot screw completely, back
it out according to the recorded turns when
removing.
●
If installing the new pilot screw, adjust the
pilot screw.
●
Install the float valve, float, and float arm pin.
Oil Level Adjustment
●
Measure the oil level height in the state of
contacting with float valve and float arm by
inclining the carburetor.
Standard Level:19mm
Tool : Float level gauge
●
Check the smooth operation of float.
!
CAUTION
△
Throttle Stop Screw
Throttle Stop Screw
Throttle Stop Screw
Throttle Stop Screw Throttle Stop Screw
Throttle Stop Screw Throttle Stop Screw
Throttle Stop Screw Throttle Stop Screw
Throttle Stop Screw
Throttle Stop Screw Throttle Stop Screw
Throttle Stop Screw
Main Jet
Main Jet
Main Jet
Main Jet Main Jet
Main Jet Main Jet
Main Jet Main Jet
Main Jet
Main Jet Main Jet
Main Jet
Float Arm Pin
Float Arm Pin
Float Arm Pin
Float Arm Pin Float Arm Pin
Float Arm Pin Float Arm Pin
Float Arm Pin Float Arm Pin
Float Arm Pin
Float Arm Pin Float Arm Pin
Float Arm Pin
Float Valve
Float Valve Float Valve
Float Valve
Float Valve Float Valve Float Valve Float Valve
Float Valve
Float Valve Float Valve
Float Valve
Float Valve
Float
Float
Float
Float
Float Float Float Float
Float
Float
Float Float
Float
Float Level Gauge
Float Level Gauge Float Level Gauge
Float Level Gauge
Float Level Gauge Float Level Gauge Float Level Gauge Float Level Gauge
Float Level Gauge
Float Level Gauge Float Level Gauge
Float Level Gauge
Float Level Gauge