manualshive.com logo in svg

Cisco IE 4000, Software Configuration Manual

The Cisco IE 4000 is a powerful industrial Ethernet switch designed for seamless network connectivity in rugged environments. Experience optimal performance and reliability with its advanced features. Easily access the comprehensive user manual for this product, available for free download exclusively on our manualshive.com.

Share
Download
background image

277

   

Configuring VLANs

VLANs

Extended-Range VLANs

With VTP version 1 and version 2, when the switch is in VTP transparent mode (VTP disabled), you can create 
extended-range VLANs (in the range 1006 to 4096). VTP version supports extended-range VLANs in server or 
transparent move. Extended-range VLANs enable service providers to extend their infrastructure to a greater number of 
customers. The extended-range VLAN IDs are allowed for any switchport commands that allow VLAN IDs. 

With VTP version 1 or 2, extended-range VLAN configurations are not stored in the VLAN database, but because VTP 
mode is transparent, they are stored in the switch running configuration file, and you can save the configuration in the 
startup configuration file by using the 

copy running-config startup-config

 privileged EXEC command. Extended-range 

VLANs created in VTP version 3 are stored in the VLAN database.

Default VLAN Configuration

See 

Table 34 on page 276

 for the default configuration for Ethernet VLANs. You can change only the MTU size, private 

VLAN, and the remote SPAN configuration state on extended-range VLANs; all other characteristics must remain at the 
default state.

Extended-Range VLAN Configuration Guidelines

Follow these guidelines when creating extended-range VLANs:

VLAN IDs in the extended range are not saved in the VLAN database and are not recognized by VTP unless the switch 
is running VTP version 3.

You cannot include extended-range VLANs in the pruning eligible range.

In VTP version 1 and 2, a switch must be in VTP transparent mode when you create extended-range VLANs. If VTP 
mode is server or client, an error message is generated, and the extended-range VLAN is rejected. VTP version 3 
supports extended VLANs in server and transparent modes.

For VTP version 1 or 2, you can set the VTP mode to transparent in global configuration mode. See 

Adding a VTP 

Client Switch to a VTP Domain, page 303

. You should save this configuration to the startup configuration so that the 

switch boots up in VTP transparent mode. Otherwise, you lose the extended-range VLAN configuration if the switch 
resets. If you create extended-range VLANs in VTP version 3, you cannot convert to VTP version 1 or 2.

STP is enabled by default on extended-range VLANs, but you can disable it by using the 

no spanning-tree vlan 

vlan-id 

global configuration command. When the maximum number of spanning-tree instances are on the switch, 

spanning tree is disabled on any newly created VLANs. If the number of VLANs on the switch exceeds the maximum 
number of spanning-tree instances, we recommend that you configure the IEEE 802.1s Multiple STP (MSTP) on your 
switch to map multiple VLANs to a single spanning-tree instance. 

Each routed port on the switch creates an internal VLAN for its use. These internal VLANs use extended-range VLAN 
numbers, and the internal VLAN ID cannot be used for an extended-range VLAN. If you try to create an 
extended-range VLAN with a VLAN ID that is already allocated as an internal VLAN, an error message is generated, 
and the command is rejected.

—

Because internal VLAN IDs are in the lower part of the extended range, we recommend that you create 
extended-range VLANs beginning from the highest number (4096) and moving to the lowest (1006) to reduce 
the possibility of using an internal VLAN ID.

—

Before configuring extended-range VLANs, enter the 

show vlan internal usage

 privileged EXEC command to 

see which VLANs have been allocated as internal VLANs.

—

If necessary, you can shut down the routed port assigned to the internal VLAN, which frees up the internal VLAN, 
and then create the extended-range VLAN and re-enable the port, which then uses another VLAN as its internal 
VLAN. See 

Creating an Extended-Range VLAN with an Internal VLAN ID, page 286

.

Summary of Contents for IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IE 4000

D-Link Verizon DSL-2750B Setup Manual preview
Verizon DSL-2750B
Brand: D-Link Pages: 6
D-Link DIR-857 Quick Installation Manual preview
DIR-857
Brand: D-Link Pages: 10
D-Link DSL-2740U Quick Installation Manual preview
DSL-2740U
Brand: D-Link Pages: 38
H3C S3100 Series Operation Manual preview
S3100 Series
Brand: H3C Pages: 1057
N-Tron 702-W User Manual & Installation Manual preview
702-W
Brand: N-Tron Pages: 62
PairGain PG-FLEX RT FRL-752 Manual preview
PG-FLEX RT FRL-752
Brand: PairGain Pages: 6
Lancom GS-2310P Instruction Manual preview
GS-2310P
Brand: Lancom Pages: 25
Paxton Net2Air Ins-40085-US Quick Start Manual preview
Net2Air Ins-40085-US
Brand: Paxton Pages: 4
ZyXEL Communications GS3700 Series Handbook preview
GS3700 Series
Brand: ZyXEL Communications Pages: 215
National Instruments SCXI-1120 User Manual preview
SCXI-1120
Brand: National Instruments Pages: 130
eWON 2101CD Installation Manual preview
2101CD
Brand: eWON Pages: 34
Dahua NVRPRO User Manual preview
NVRPRO
Brand: Dahua Pages: 113
Ubiquiti EdgeRouter ER-8 Quick Start Manual preview
EdgeRouter ER-8
Brand: Ubiquiti Pages: 20
ExtraHop EDA 4200 Install preview
EDA 4200
Brand: ExtraHop Pages: 2
Paradyne Hotwire 7996 User Manual preview
Hotwire 7996
Brand: Paradyne Pages: 46
LevelOne GSW-0508 User Manual preview
GSW-0508
Brand: LevelOne Pages: 10
SET 89299 Technical Description preview
89299
Brand: SET Pages: 38
Patton electronics 3196RC User Manual preview
3196RC
Brand: Patton electronics Pages: 93

Brands by name

Popular brands

Load more brands